• Fixes an issue that caused other page functionality to not work.
• Fixes an issue where extra Apply and Cancel buttons were displayed.

Fixes an issue where the plugin could hang when it was updated.

Fixes an issue when saving filter templates.

This version requires Device42 v16.00.00+!

• Fixes JQL error when using a D42 custom field in the ORDER BY clause of a JQL query.

This version requires Device42 v16.00.00+!

• Improves error message.

This version requires Device42 v16.00.00+!

• Fixes sync error that occurred after a connection reset.

This version requires Device42 v16.00.00+!

• Fixes incremental sync counts.
• Removes the migrate menu item which is no longer needed.

This version requires Device42 v16.00.00+!

• Resolves issues when syncing devices and searching for devices when a device had many IPs.

This version requires Device42 v16.00.00+!

• Resolves an issue where error messages would be logged when running a sync.
• Resolves an issue where the Enter key did not work.

This version requires Device42 v16.00.00+!

• Resolves an issue where the incremental sync would fail.

This version requires Device42 v16.00.00+!

• Resolves issues that might occur when used with other plugins.
• Resolves issue where filter active types could not be deselected.
• Resolves display issues.

This version requires Device42 v16.00.00+!

• Adds support for Data Center.
• Adds IP address information for devices.
• Resolves an issue where the Device42 custom field would be cleared if the Enter key was pressed when in a single line text field.
• Resolves display issues.

• Fixes an issue that caused other page functionality to not work.
• Fixes an issue where extra Apply and Cancel buttons were displayed.

Fixes an issue where the plugin could hang when it was updated.

Fixes an issue when saving filter templates.

This version requires Device42 v16.00.00+!

• Fixes JQL error when using a D42 custom field in the ORDER BY clause of a JQL query.

This version requires Device42 v16.00.00+!

• Improves error message.

This version requires Device42 v16.00.00+!

• Fixes sync error that occurred after a connection reset.

This version requires Device42 v16.00.00+!

• Fixes incremental sync counts.
• Removes the migrate menu item which is no longer needed.

This version requires Device42 v16.00.00+!

• Resolves issues when syncing devices and searching for devices when a device had many IPs.

This version requires Device42 v16.00.00+!

• Resolves an issue where error messages would be logged when running a sync.
• Resolves an issue where the Enter key did not work.

This version requires Device42 v16.00.00+!

• Resolves an issue where the incremental sync would fail.

This version requires Device42 v16.00.00+!

• Resolves issues that might occur when used with other plugins.
• Resolves issue where filter active types could not be deselected.
• Resolves display issues.

This version requires Device42 v16.00.00+!

• Adds support for Data Center.
• Adds IP address information for devices.
• Resolves an issue where the Device42 custom field would be cleared if the Enter key was pressed when in a single line text field.
• Resolves display issues.

This version requires Device42 v16.00.00+!

• Adds support for Data Center.
• Adds IP address information for devices.
• Resolves an issue where the Device42 custom field would be cleared if the Enter key was pressed when in a single line text field.
• Resolves display issues.

This version requires Device42 v16.00.00+!

• Resolves an issue with cancel buttons not working.
• Resolves an issue where an error message would be displayed when logging into the customer portal.

*This release REQUIRES Device42 v16.00.00+*This release adds support for Device42 v16.00.00+.

Minor fixes in this release.

• Fixes a permission issue
• Resolves an issue with the comments layout
• Resolves customer portal issues
• Fixes custom field issues

Fixes error some users experience when trying to open saved boards; fixes permissions issue on newer Jira (~v7.12.3) releases, other minor fixes.

Smart-search supercharges Device42 custom fields by allowing administrators to pre-apply one or more custom CI filters (>1 filters are applied as 'AND' by default) on each of their custom fields. Each field's filter(s) are evaluated to pre-populate your custom fields with values, simplifying custom field usage for everyone! With smart search, you can pre-populate a custom-fields dropdown with select CIs or can easily pre-define all possible values that could be input into a given custom field; as soon as a user begins typing, the input is matched against your pre-defined values!

This release also adds new custom-field formatting features:

- "Accordion-style" custom fields: accordion style fields allow conservation of screen-space, with field details initially hidden behind click-expandable headers. Clicking the header on an accordion field reveals associated details, while another click collapses those details back into the header.

- Text size in custom fields can now be configured

Minor bugfix release

Minor fixes including support for German language characters and hyperlinked IP addresses where appropriate.

The 4.0.1 release of Device42's JIRA Connector uses DOQL (Device42 Object Query Language) in place of Device42's RESTful API's to gather CI's. Not only does this mean you can get more granular, but the new plugin is much, much faster! You can now create custom CI-type queries, and parameters are also fully customizable with DOQL. Overall scan and search performance has been dramatically increased. Minor bug fixes with this release, as well!

Before, you could select what CI's were displayed, but all were always synced. With the new capabilities of this release, you can choose exactly what CI's to sync and not to sync. Not only does this give you more control, but it could potentially speed up your syncs, too!

You can now create custom workflows in Jira that not only use Device42 custom fields, but you can now validate against data entered into these custom fields and/or trigger conditions based upon data entered into the fields. You can combine Conditions and Validators as you see fit, while also filtering both the data your custom field makes available to the user, as well as what *can be entered* into the fields … and that’s not all … In the 3.0.0 release, a workflow transition can be configured to send a POST to Device42, currently able to request the next available IP in a specified subnet.

Beyond all that new functionality, you can configure a condition or validator to verify criteria in real-time against the Device42 database in those special cases where things might have changed since the last scheduled sync. And enabling the real-time verification is as easy as checking a checkbox.

Added support for following additional CI:

• Software and Software In Use
• Service and Service Instances
• Application Components

We have added functionality to lazy load the CIs. This will help with performance if you have huge amount of CIs synced from Device42 CMDB to Jira

• Added parallel and thread based sync with Device42 for faster sync of the CI data.
• Fixed the issue with templates for old versions
• Fixed issue with manual scan hang - now it is scheduled into other thread
• Added statistics of the update to the update data screen

• Added filter templates - now it is possible to set default behavior of filters for the new projects
• Minor bug fixes
• Added new parameters for existing CIs
• More linking between CIs

Added support for following additional CI:

• Hardware models
• Telco circuits
• Operating Systems

• Reorganized the storage system, version with the addition of new CIs / parameters would be released more often
• Added new CI types: assets, subnets and part modules
• For existing CI types added set of new parameters
• Enhanced filtering ability - added query language for the smart search of the parameters.
• Added caching of the filter results to speed up the CI search within a filter
• Enhanced filtering ability - added possibility to show / hide parameters of CIs. The parameters can be enabled / disabled to be shown within the custom fieldsAdded more parameters to search capability - the CIs can be searched by any searchable parameter within the issue navigator

Minor bug fixes

This is a bug fix to account for an api change in D42 in v9.8.0.

Couple of changes in this release:

• Confluence like controls for custom fields
• Minor error fixes

This release has 2 changes:

• Support for Jira service desk.
• Support for API changes in v9.6.0 of Device42. We added an option to enforce API limit on GET calls. This update supports that.

There was one issue that caused NPE(null pointer exception) - when the value is incorrect - it can break the rendering. It has been now fixed.

If you want to see different types of CIs in different projects and also filter them by different creteria, you can now do that. We have move the filter settings from the global connector settings to individual project settings. You can choose which CIs should show up for the custom field and also apply different filters for different projects.

You can now select multiple CIs per issue. All the CIs get indexed for search and show up on the view/edit page as well. Available in XML output as well.

This release adds support for Jira 7.

Also, added Parts and PDUs as CIs.

v1.0.8 of Device42 Jira connector has following changes:

• Users can now choose what devices to bring in with filters such as service level, device type, customer and tags.
• If a device is deleted from Device42 and an issue has a link for it, the link shows that now.
• There was a bug for device links in certain cases. Now fixed.

• Devices and rack lists are sorted by name.
• Devices are the default selection.
• You can create an issue without selecting a device or rack.

• On issue view page, you can directly go to Device42 page for the related CI.
• When selecting a CI on the issue create page, you can now search by the CI name.

Connector uses Device42 REST APIs to sync data from Device42 to Jira. Users can update CI data in Jira on demand or at scheduled intervals. First release focuses on Devices and Racks as CIs from Device42.